So...battlemech:
BattleMech Technical Readout
Type/Model: Hewn Wolf HEWW-O-1IH
Tech: Inner Sphere / 3067
Mass: 75 tons
Chassis: Endo Steel
Power Plant: 375 GM XL Fusion
Walking Speed: 54.0 km/h
Maximum Speed: 86.4 km/h
Jump Jets: None
Jump Capacity: 0 meters
Armor Type: 231 pts Ferro-Fibrous
Armament: 26.5 tons of pod space
Based largely on the Timberwolf(duh), it suffers the exceptional critical-space restrictions of Inner Sphere equipment. The Hewn Wolf largely avoids imitating the Timberwolf in its weapons layout(which is how it escapes the designation of Mad Cat-O ). Only Configurations 4 and 5 take after Timberwolf
loadouts(The Prime and D configs respectively), and then only
marginally. The configurations overall usually require more high-weight,
low-crit items, which gives an excuse to use weapons I often overlook
like light ACs, Large Pulse Lasers, and the like. In addition, the .5
pod space gives me an excuse to use CASE, which I don't usually bother
with when it comes to XL engines.
I know the Rakshasa does this(as well as a few hundred other home-brewed designs), but it's not an omni. There's a Config 6 that covers the Rakshasa, but it has to drop the Medium Pulse Laser for an ER Small Laser.
Config 1 - It kills things from rather far away.
Armament:
1 LRM 10 (12)
1 ER Large Laser
2 Autocannon/2s (45)
1 Improved C³ CPU
Config 2 - Close up or far away, it's a bit of a pain.
Armament:
1 SRM 4 (25) /Alt: 1 SRM 6(15)
2 ER Medium Lasers /Alt: 1 ER Medium Laser
1 ER PPC
1 Light Gauss Rifle (32)
1 CASE
Config 3 - Close and mean. A large laser for 'range'.
Armament:
1 Large Laser /Alt: ER Large Laser
1 Large Pulse Laser
2 Streak SRM 6s (15)
2 Medium Pulse Lasers
1 CASE
Config 4 - It's sorta like a Timberwolf Prime
Armament:
2 LRM 15s (16)
2 ER Large Lasers
1 CASE
Config 5 - It's sorta like a Timberwolf D
Armament:
2 ER PPCs
2 Streak SRM 6s (15)
1 Medium Pulse Laser(R)
1 CASE
Chassis Breakdown
--------------------------------------------------------
Type/Model: Hewn Wolf HEWW-O-1IH
Mass: 75 tons
Equipment: Crits Mass
Int. Struct.: 114 pts Endo Steel 14 4.00
(Endo Steel Loc: 4 LA, 3 RA, 5 LT, 1 RT, 1 CT)
Engine: 375 XL Fusion 12 19.50
Walking MP: 5
Running MP: 8
Jumping MP: 0
Heat Sinks: 15 Double [30] 0 5.00
Gyro: 4 4.00
Cockpit, Life Supt., Sensors: 5 3.00
Actuators: L: Sh+UA R: Sh+UA 12 .00
Armor Factor: 231 pts Ferro-Fibrous 14 13.00
(Armor Crit Loc: 1 HD, 2 LA, 2 RA, 2 LT, 2 RT, 1 CT, 2 LL, 2 RL)
Internal Armor
Structure Value
Head: 3 9
Center Torso: 23 34
Center Torso (Rear): 12
L/R Side Torso: 16 24/24
L/R Side Torso (Rear): 8/8
L/R Arm: 12 24/24
L/R Leg: 16 32/32
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
--------------------------------------------------------
TOTALS: 0 61 48.50
Crits & Tons Left: 17 26.50
If there is a special format for omnimechs in HeavyMetalPro, I remain unaware of it.
Configuration 1 Breakdown
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
All Arm Actuators LA, RA - 4 0.00
1 LRM 10 RA 4 12 3 6.00
(Ammo Locations: 1 RA)
1 ER Large Laser LA 12 2 5.00
2 Autocannon/2s RT 2 45 3 13.00
(Ammo Locations: 1 RT)
1 Improved C³ CPU RT 0 2 2.50
--------------------------------------------------------
TOTALS: 18 14 26.50
Crits & Tons Left: 3 .00
Calculated Factors:
Total Cost: 24,145,625 C-Bills
Battle Value: 1,227 (+114 for C³)
Configuration 2 Breakdown
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
Right Arm Actuators RA - 2 0.00
1 SRM 4 RA 3 25 2 3.00
(Ammo Locations: 1 RA)
1 ER Medium Laser RA 5 1 1.00
1 ER PPC LA 15 3 7.00
1 ER Medium Laser LA 5 1 1.00
1 Light Gauss Rifle RT 1 32 7 14.00
(Ammo Locations: 2 LT)
CASE Equipment: RT 1 .50
--------------------------------------------------------
TOTALS: 29 17 26.50
Crits & Tons Left: 0 .00
Calculated Factors:
Total Cost: 23,426,484 C-Bills
Battle Value: 1,554
Configuration 3 Breakdown
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
All Actuators LA,RA - 4 0.00
1 Large Laser RA 8 2 5.00
1 Large Pulse Laser LA 10 2 7.00
2 Streak SRM 6s RT 8 15 5 10.00
(Ammo Locations: 1 RT)
2 Medium Pulse Lasers LT 8 2 4.00
CASE Equipment: RT 1 .50
--------------------------------------------------------
TOTALS: 34 16 26.50
Crits & Tons Left: 1 .00
Calculated Factors:
Total Cost: 23,069,375 C-Bills
Battle Value: 1,471Configuration 4
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
All Actuators LA,RA - 4 0.001
LRM 15 RA 5 16 5 9.00
(Ammo Locations: 2 RT)
1 ER Large Laser LA 12 2 5.00
1 LRM 15 RT 5 3 7.00
1 ER Large Laser LT 12 2 5.00
CASE Equipment: RT 1 .50
--------------------------------------------------------
TOTALS: 34 17 26.50
Crits & Tons Left: 0 .00
Calculated Factors:
Total Cost: 23,334,062 C-Bills
Battle Value: 1,512
Configuration 5
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
1 ER PPC RA 15 3 7.00
1 ER PPC LA 15 3 7.00
2 Streak SRM 6s RT 8 15 5 10.00
(Ammo Locations: 1 RT)
1 Medium Pulse Laser LT(R) 4 1 2.00
CASE Equipment: RT 1 .50
--------------------------------------------------------
TOTALS: 42 13 26.50
Crits & Tons Left: 4 .00
Calculated Factors:
Total Cost: 23,606,406 C-Bills
6 comments:
I have never liked how HeavyMetalPro displays structure, actuator & armor locations. The heat column *is* nice though.
Mad Cat-O? So that's why there's never been a "Lion" Omnimech.
Wow. I forgot I ever used HeavyMetalPro.
SSW is just so great for stuff. I use it for everything on the blue moon that I make 'mechs.
After I print all of the house rules, I'm planning on reposting the custom 'mechs I have. Maybe I should remake all of them in SSW.
It makes sense to store them that way.
SSW's GUI is alright, but I still prefer plain ol' notepad.
...rewriting everything in notepad would be pointlessly, stupidly, epic.
I am definitely considering it.
Heh, can't imagine what the ROI'd be on that.
Post a Comment